How do you know if a Subwoofer will fit in your car? Or is it all pretty much universal or what? - fitting a subwoofer
I have all new speakers and now need a subwoofer, so I'm looking for some, but I do not know if they fit my car or not. I have one in 1996 Chrysler New Yorker and got all new speakers and display unit for them. Any help is greatly appreciated.
Monday, January 11, 2010
Fitting A Subwoofer How Do You Know If A Subwoofer Will Fit In Your Car? Or Is It All Pretty Much Universal Or What?
2 comments:
Prefabricated housing, so that it fits in the trunk of your size. If you go this route, select an image that you like the sound and then synchronize to a compatible amplifier. (In other words, if you buy a box that is 600RMS/1300Peak into 2 ohms, you have to) an amplifier that has a similar performance at 2 ohms to buy.
The other way is to buy submarines and then separately buy or build a case that is compatible, each having a sub-box type, has recommended by the manufacturer / size for better performance. So, if you wanted to reach up to 15, you want the size of the box you will find necessary to make adjustments. This information can be found on the manufacturer's website.
Side note: There is no impedance to the right, the reason for the rating-ohm resistor in the wiring connections will be different, depending on how you try to define things.
Use this option if your problem is with the understanding of the wiring configuration.
http://rockfordfosgate.com/rftech/woofer ...
Recommendation:
It seems that if you turn something bad in their home blow, but does not attempt toAds, read a few ready-made boxes of 12 inches (without an amplifier with them) and fit them with an amplifier. If you save money and only a low minimum bid must, there are combos in very cheap amp but they are not as strong or as high quality.
Discount example:
http://www.circuitcity.com/ccd/productDe ...
Worthy example:
http://www.circuitcity.com/ssm/MTX-Dual- ...
http://www.circuitcity.com/ssm/MTX-Mono- ...
(There are many, many amps, but I have to give them an idea.)
Change :________________
When I say, prefabricated boxes I am referring is responsible for the purchase of boxes manufacturer.
IPR is a lecturer who is a resistive load. There will be adjusted at the amp and power (watts RMS).
First, stay away from pre-fab options because there are recommendations for the type or size of the housing by the manufacturer of subcontractors.
See my website for more information http://spkrbox1.spaces.live.co
(I had to leave out "m" at the end of the com, that Yahoo has occasional problems with links)
Post a Comment